1963 Plymouth Sport Fury

August 2008 Mopar of the Month

Ron Nies Senior writes: I bought my 1963 Plymouth Sport Fury from a good friend in May of 2003. My youngest son said he wanted the Mopar, but he lost interest as he got older; I knew I wanted the Plymouth since I love Max Wedge cars and the 1963 Plymouth is my favorite!

I decided to sell my Dart to keep the 1963 and my oldest son, Ron Jr., wanted my Dart; so I sold to to him, very cheap! I needed some money to do a mild restoration on the 1963.

The Sport Fury was in good shape but needed front floor pans and a good going over.

The original 383 came out and I built a mild 440 to look like a 426 Max Wedge but without the crossram, as I could not afford it at the time.

I also built a new 727 transmission and a 8&3/4 rear in which I installed 4.30’s.

I rebuilt all of the front suspension and repainted under the car and hood.

Cash was short so I left the stock rear springs on with air shocks.

The paint was in pretty good shape so we just buffed the car out.

Car and engine specifications summary:

• 1970 440 block, .030 over (446)
• Stock crank and rods with KB quench dome pistons.
• 906 heads I ported and cut for 10.0 comp and I built a nice .042 quench so it will run fine on 92 pump.
• MP .557 cam on a 104 centerline with Isky ductile iron rockers.
• Holley Street Dominator intake and Holley 850 Double Pumper.
• Mallory distributor and MP orange ignition ECU.
• Hedman 1-3/4 headers with 3 inch exhaust and Dyno-Max Ulta-Flow mufflers.
  
• 727 I built with bolt-in overrunning clutch and the Turbo Action reverse manual valve body, along with a Dynamic 9.5 convertor that drives great and flashes about 4200.
• 8-3/4 with 4.30’s and I run Hoosier QTP 29 x 11.5 tires on the street and strip as they just fit in the stock wheelwells.
• The body is all stock and I added frame connectors and a 6 point roll bar.
• The Plymouth weighs just over 3700 with me and the roll bar.

The Sport Fury is a 99% street car that sees the track 2 or 3 times a year. The best et so far is 11.52 @ 116.84. But that was the only pass I got that day as it spun on that run and I broke and axle gear tooth on that pass, so I did not make any more runs that day and could drive it the 45 miles home, which I did.

I have since installed a Detroit Locker and cannot wait to get back to the track and try for 11.40’s as I have not really done any tuning yet either.

By the way, my son with his Dart and me with my 1963 were lucky enough to get our cars featured in the February / March issue of Mopar Enthusiast in the Father-Son shootout, along with our two friend’s cars.

Ron,

Mopars and family; it does not get better! 

Gary H.